Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Toyota 4Раннер
- 1. Maintenance instruction
   1.2. Dashboard
   1.3. The combined devices
   1.4. Designation of symbols of light indexes
   1.5. Keys
   1.6. Immobilizer system (recognition of a code of start-up of the engine)
   + 1.7. Doors
   1.8. Cover of a fuel tank
   1.9. Adjustment of a forward seat
   1.10. Adjustment of an inclination of a steering wheel
   1.11. Adjustment of provision of a rear-view mirror
   1.12. Plafond of internal lighting
   1.13. Plafond of individual lighting
   1.14. Cleaner and windscreen washer
   1.15. Cleaner and washer of back glass
   + 1.16. Headlights and turn indexes
   1.17. Heater of back glass
   1.18. Index of a stock of fuel
   1.19. The remote thermometer of cooling means
   1.20. Measuring instrument of pressure of oil
   1.21. Voltmeter
   1.22. Tachometer
   1.23. Counter of the general run and counter of daily run
   + 1.24. Indexes and warning signals
   1.25. Lock of ignition and lock of a steering column
   1.26. Automatic box
   1.27. Radio receiver AM-UKV with electronic control
   1.28. An AM-VHF-radio tape recorder with electronic control
   1.29. Adjustment of the direction of a stream of air
   1.30. Governing bodies heater
   1.31. Hours
   1.32. Lighter and ashtray
   1.33. Perchatochny box
   1.34. The container for trifles
   - 1.35. Actions at refusal of start-up of the engine
      1.35.1. Engine start in case of cylinder overflow by gasoline
      1.35.2. Air removal from fuel system
      1.35.3. Engine start-up in emergency conditions
      1.35.4. Start from the additional battery
      1.35.5. If the engine decayed during movement
      1.35.6. Actions at a wheel puncture
   1.36. Identification numbers of the car
   1.37. Identification number
   1.38. Manufacturer's certificate of origin
   1.39. VECI label
   1.40. Numbers on transmission units
   1.41. Car raising jack
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes



1.35.1. Engine start in case of cylinder overflow by gasoline

GENERAL INFORMATION

In default at start-up cylinders of the engine can be overflowed with gasoline because of repetition of unsuccessful attempts of start-up.

On engines 4E-FE, 4A-FE, 7A-FE

Turn the ignition key in the situation START and press a butterfly valve pedal. Hold a key and a pedal no more than 15 seconds then release. Then clean a foot from a pedal and repeat start.

On model 2E engines

Press a pedal of a butterfly valve and hold 15–20 seconds. Then try to start the engine, without cleaning a foot from a pedal. It is not allowed to press a pedal, it should be held only at a floor.

If the engine is not started after 15 seconds of work of a starter, switch off a starter, wait some minutes then repeat attempt.

In default start of engines of models 4E-FE, 4A-FE and 7A-FE repair or adjustment is required.

In default start-up of the engine of type 2E execute the procedure described above and test the following.

PERFORMANCE ORDER
1. Turn out candles and dry electrodes.
2. Turn the ignition key in the situation START and press a butterfly valve pedal. Hold a key and a pedal no more than 15 seconds then release.
3. Wrap spark plugs.
4. Having cleaned a foot from a pedal, try to start the engine.
5. If the engine is not started, adjustment or repair is necessary.