Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
- 10. Body
   10.1. Maintenance and body repair
   10.2. Vinyl furnish
   10.3. Upholstery and rugs
   + 10.4. Repair of insignificant damages of a body
   10.5. Repair of considerable damages of a body
   10.6. Loops and locks
   10.7. Windscreen and motionless glasses
   10.8. Cowl
   10.9. Latch of the lock of a cowl and cable
   10.10. Forward lattice
   10.11. Bumpers
   10.12. Facing panel of a door
   10.13. External mirror
   10.14. Door
   10.15. Forward wing
   10.16. Door of a cargo compartment
   10.17. Glass of a door of a cargo compartment and window regulator
   + 10.18. Glasses of doors
   10.19. Window regulator
   10.20. Lock clamp, switch of the lock and door handles
   10.21. Casing of a steering column
   10.22. Central floor section
   10.23. Panels of forward facing of salon
   10.24. Panel of forward facing of salon
   10.25. Air inlet lattice
   10.26. Seats
+ 11. Electric equipment
+ 12. Electroschemes




10.17. Glass of a door of a cargo compartment and window regulator

GENERAL INFORMATION

Door of a cargo compartment

1. Window regulator
2. The right directing
3. Glass
4. Cover
5. Fringing
6. Sealant external
7. Casing
8. Sealant internal
9. Door facing
10. Decorative slip
11. Drum of the switch of the lock
12. Pusher
13. Lock
14. The left directing
15. Rack

Removal and installation

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. For removal of glass it is recommended to remove a door.
3. To remove the handle of a door of a back compartment, remove a decorative cap.
4. Unscrew a bolt and remove the door handle.
5. To remove door facing, disconnect 10 latches.
6. To uncover a service opening, disconnect the socket and unscrew screws.
7. Remove a glass fringing, a sealant and glass.
8. Disconnect other sockets and remove a window regulator (shooters specified bolts of fastening of a window regulator).
9. Installation is carried out upside-down.