Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
- 5. Fuel and exhaust systems
   5.1. Specifications
   5.2. Order of a decompression of fuel system
   + 5.3. Fuel pump and pressure of fuel
   5.4. Hoses and connections
   5.5. Fuel tank
   5.6. Fuel pump
   5.7. Fuel level sensor
   5.8. Air filter
   5.9. Butterfly valve cable
   + 5.10. System of electronic injection of fuel (EFI system)
   - 5.11. Units of system of injection of fuel
      5.11.1. Butterfly valve case
      5.11.2. Regulator of pressure of fuel
      5.11.3. Idling regulator (IAC valve)
      5.11.4. Fuel and nozzle distributor
      5.11.5. Leveling chamber
   5.12. Service of an exhaust system
   + 5.13. System of decrease in toxicity of exhaust gases
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes



5.11.2. Regulator of pressure of fuel

GENERAL INFORMATION

Bolts of a regulator and hoses (the 4-cylinder engine)

 
1. Pressure regulator
2. Return hose
3. Ring
4. An operating vacuum hose

Pressure regulator on the V6 engine



1. Ring
2. Pressure regulator
3. Return hose
4. Burn down conductings

Check

See subsection 5.3.3.

Replacement

PERFORMANCE ORDER
1. Execute a decompression and disconnect the battery from weight.
2. Disconnect from a regulator a vacuum hose.
3. Disconnect from a regulator a return fuel hose, having pressed it.
4. Unscrew bolts of fastening of a regulator of pressure of fuel and remove a regulator.
5. Installation is carried out upside-down. Replace ring laying.