Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation


Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Systems of heating, ventilation
   4.1. Specifications
   4.2. Antifreeze
   4.3. Thermostat
   4.4. Krylchatka of the fan and hydrocoupling
   4.5. Radiator and tank
   4.6. Maslookhladitel
   + 4.7. Pump
   4.8. Sensor of temperature of liquid
   4.9. Electric motor and chain of the fan of a heater
   4.10. Heater radiator
   4.11. Control panel conditioning block
   + 4.12. Central air
   4.13. Compressor
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes




4.13. Compressor
GENERAL INFORMATION

Details of fastening of the compressor on the 4-cylinder engine
1. Arm
2. Belt
3. Engine guards
4. To tighten a dinamometrichesky key 		5. Final hose
6. A sucking-in hose
7. Ring

The compressor and adjacent details on the engine of V6 3.4 l
1. Pump of the hydraulic booster
2, 3. Belt
4. Engine guards
5. To tighten a dinamometrichesky key 		6. Final hose
7. A sucking-in hose
8. Ring
9. Arm

Removal

PERFORMANCE ORDER
1. Depressurize the conditioner and remove a coolant in car-care center.
2. Disconnect the battery from weight.
3. Remove from the compressor a belt.
4. Disconnect the socket and disconnect coolant tubes.
5. Unscrew bolts of fastening of the compressor and remove the compressor.
6. If the new compressor is established, execute all procedures specified in the enclosed instruction.

Installation

PERFORMANCE ORDER
1. Installation is carried out upside-down.
2. Replace all sealing rings, having picked up them as the compressor.