Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation


Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
- 6. Transmissions
   - 6.1. Mechanical transmission
      6.1.1. Specifications
      6.1.2. A back epiploon of a check point (on rear-wheel cars)
      6.1.3. Support of a case of a check point
      6.1.4. Check point control lever
      6.1.5. Removal and manual transmission installation
   + 6.2. Automatic transmission
   + 6.3. Transfer case
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes




6.1.3. Support of a case of a check point

Check and replacement

PERFORMANCE ORDER
1. Having pushed mount between a cross-piece and a support pillow also shake.
2. The case should not be displaced strongly from a support. At detection of wear of a support (a rubber otsloyeniye), a support replace.
3. Substitute on a check point case a jack or an emphasis and unscrew nuts and bolts of support (on a photo bolts of fastening of a check point of rear-wheel cars at the left are shown, on a photo on the right – bolts of a support and a cross-piece of a check point of all-wheel drive cars).
4. Raise a case and get a support.
5. Installation is carried out upside-down.