Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
- 6. Transmissions
   - 6.1. Mechanical transmission
      6.1.1. Specifications
      6.1.2. A back epiploon of a check point (on rear-wheel cars)
      6.1.3. Support of a case of a check point
      6.1.4. Check point control lever
      6.1.5. Removal and manual transmission installation
   + 6.2. Automatic transmission
   + 6.3. Transfer case
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes
, .


6.1.4. Check point control lever

Removal and installation

PERFORMANCE ORDER
1. Remove the central section of the forward panel (see subsection 10.24).
2. Unscrew the lever handle (a photo at the left). Unscrew 4 screws (are shown by shooters on a photo on the right), remove a cover and a flange.
3. On a part of 4WD cars covers of both levers fasten one flange.
4. Take a small cover of the check point lever (a photo at the left). On some check points press the lever, turn counter-clockwise (a photo on the right).
5. Remove the lever.
6. Installation is carried out upside-down. Grease rubbing surfaces of the lever with konsistentny greasing.