Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
- 6. Transmissions
   - 6.1. Mechanical transmission
      6.1.1. Specifications
      6.1.2. A back epiploon of a check point (on rear-wheel cars)
      6.1.3. Support of a case of a check point
      6.1.4. Check point control lever
      6.1.5. Removal and manual transmission installation
   + 6.2. Automatic transmission
   + 6.3. Transfer case
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes



6.1.2. A back epiploon of a check point (on rear-wheel cars)

Replacement

PERFORMANCE ORDER
1. The widespread reason of a leak in a case of a check point is wear of a back epiploon in a case and plug shaft (if it is provided), and also epiploon and a sealing ring of a reducer of a speedometer. It is possible to replace these details without check point removal.
2. Lift the car. The leak of an epiploon is appreciable by oily deposits on a forward part of the driveshaft, and also at an end face of a shaft of a check point.
3. Remove the driveshaft (see subsection 7.3.2).
4. Carefully displace a gryazeotrazhatel in easy blows of a hammer with soft the brisk.
5. Hook and carefully get an epiploon.
6. If the epiploon does not give in to removal, it should be got by means of the special tool (is available on sale).
7. Press an opravka a new epiploon, watching that the epiploon came without a distortion.
8. Napressuyte gryazeotrazhatel.
9. Grease shlitsa of a fork and a shaft and establish the driveshaft, without having damaged thus an edge of a new epiploon.