Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation


Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
- 7. Transmission elements
   7.1. Specifications
   + 7.2. Coupling
   - 7.3. Kardanny (е) shaft (ы) and kardanny hinges
      7.3.1. Check of driveshafts
      7.3.2. Removal and driveshaft installation
      7.3.3. Replacement of kardanny hinges
   7.4. Back and forward axes
   7.5. Bearing, epiploon and semi-axis of the back bridge
   7.6. Epiploon of a reducer of the back bridge and forward axis
   7.7. Zadny Bridge
   7.8. Forward semi-axes
   7.9. Replacement of covers and CV JOINT dismantling
   + 7.10. Electromagnetic drive of a forward leading axis (ADD system)
   7.11. Forward reducer
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes




7.3.2. Removal and driveshaft installation
PERFORMANCE ORDER
1. Lift also a back part of the car.
Back shaft
2. Designate the mutual provision of flanges of the driveshaft and a leading gear wheel of a reducer.
3. Holding bolts, unscrew four nuts of fastening of a flange of a back shaft.
4. Disconnect the driveshaft from a back flange. Get a shaft from transmission or a transfer case, or unscrew bolts of fastening of the hinge to a flange of a transfer case.
5. On rear-wheel cars muffle an opening in a transmission.
6. Installation is carried out upside-down. Combine the labels put at dismantling and tighten nuts with the set moment.
Forward shaft
7. Remove a protective casing of a forward shaft.
8. Designate the mutual provision of flanges of a reducer, a transfer case and kardanny hinges.
9. Holding bolts, unscrew nuts of fastening of a shaft and remove a shaft.
10. Installation is carried out upside-down. Combine the labels put at dismantling and tighten nuts with the set moment. At first fix a shaft on a forward reducer, having tightened nuts by hand, and then – on a transfer case. Tighten bolts and nuts with the set moment.