Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
- 7. Transmission elements
   7.1. Specifications
   + 7.2. Coupling
   + 7.3. Kardanny (е) shaft (ы) and kardanny hinges
   7.4. Back and forward axes
   7.5. Bearing, epiploon and semi-axis of the back bridge
   7.6. Epiploon of a reducer of the back bridge and forward axis
   7.7. Zadny Bridge
   7.8. Forward semi-axes
   7.9. Replacement of covers and CV JOINT dismantling
   + 7.10. Electromagnetic drive of a forward leading axis (ADD system)
   7.11. Forward reducer
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes

7.7. Zadny Bridge

Removal and installation

PERFORMANCE ORDER

1. Lift a back part of the car and establish supports under a body. Remove back wheels.
2. Prop up the cart with a jack the back bridge under a reducer case.
3. Disconnect from a reducer the driveshaft.
4. Disconnect from the bridge a spring of the dosing-out perepuskny valve (see subsection 8.10)
	5. Disconnect and muffle hoses and tubes of brakes.
6. Remove back brake drums.
7. Disconnect a cable of the hand brake.
8. Disconnect a hose сапуна.
9. Disconnect and compress shock-absorbers.
10. Disconnect from a body a stabilizer cross-piece, cross-section and longitudinal bars.
11. Carefully lower the back bridge.
12. Installation of the bridge is carried out upside-down.
13. Pump over brakes (see subsection 8.14).