Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
- 7. Transmission elements
   7.1. Specifications
   + 7.2. Coupling
   + 7.3. Kardanny (е) shaft (ы) and kardanny hinges
   7.4. Back and forward axes
   7.5. Bearing, epiploon and semi-axis of the back bridge
   7.6. Epiploon of a reducer of the back bridge and forward axis
   7.7. Zadny Bridge
   7.8. Forward semi-axes
   7.9. Replacement of covers and CV JOINT dismantling
   + 7.10. Electromagnetic drive of a forward leading axis (ADD system)
   7.11. Forward reducer
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes

7.8. Forward semi-axes

GENERAL INFORMATION

Semi-axis details

1. Gryazeotrazhatel
2. Tulip type CV JOINT
3, 10. Lock ring
4. Cover of the internal CV JOINT

5. Collars
6. Cover of the external CV JOINT
8. Crosspiece of the CV JOINT (Tripod)
9. The external CV JOINT with a semi-axis

Removal and installation

PERFORMANCE ORDER

1. Lift the car and remove wheels.

2. Merge oil from a forward reducer.

3. Rasshplintuyte also unscrew a nave nut (ask the assistant to press on
brake).

4. Weaken a semi-axis in a rotary fist a brass opravka (not steel).

5. Disconnect from a fist a soshka.

6. Twist a fist outside, having turned a wheel, and get a semi-axis at first from a fist, then from a reducer. If necessary displace a semi-axis in blows of a rubber hammer.

7. Installation is carried out upside-down.