Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
- 7. Transmission elements
   7.1. Specifications
   + 7.2. Coupling
   + 7.3. Kardanny (е) shaft (ы) and kardanny hinges
   7.4. Back and forward axes
   7.5. Bearing, epiploon and semi-axis of the back bridge
   7.6. Epiploon of a reducer of the back bridge and forward axis
   7.7. Zadny Bridge
   7.8. Forward semi-axes
   7.9. Replacement of covers and CV JOINT dismantling
   + 7.10. Electromagnetic drive of a forward leading axis (ADD system)
   7.11. Forward reducer
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes
.



7.11. Forward reducer

GENERAL INFORMATION

Forward reducer

1. Socket of the switch of a drive
2. Vacuum hoses
3. Forward driveshaft
4. Hose сапуна
5. Back support
6, 14. Lock ring
7. Left semi-axis

8, 11 Laying
9. Drain stopper
10. Left forward support
12. Right forward support
13. Reducer
15. Right semi-axis

Removal and installation

PERFORMANCE ORDER
1. Lift the car and remove wheels.
2. Remove the bottom guard of the engine.
3. Merge oil from a reducer.
4. Disconnect the driveshaft.
5. Remove semi-axes.
6. Disconnect a hose сапуна, unscrew 2 bolts of the holder and disconnect the socket and vacuum hoses of an electromagnetic drive of a forward leading axis.
7. Establish under a reducer the cart with a jack.
8. Unscrew a nut of a back support (a photo at the left) and nuts of two forward support (a photo on the right). Lower a reducer.
9. Installation is carried out upside-down.