Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
- 7. Transmission elements
   7.1. Specifications
   + 7.2. Coupling
   + 7.3. Kardanny (е) shaft (ы) and kardanny hinges
   7.4. Back and forward axes
   7.5. Bearing, epiploon and semi-axis of the back bridge
   7.6. Epiploon of a reducer of the back bridge and forward axis
   7.7. Zadny Bridge
   7.8. Forward semi-axes
   7.9. Replacement of covers and CV JOINT dismantling
   - 7.10. Electromagnetic drive of a forward leading axis (ADD system)
      7.10.1. Drive
      7.10.2. Block of solenoids
      7.10.3. Relay
      7.10.4. Drive switch
      7.10.5. Switch of the selector of a forward axis
   7.11. Forward reducer
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes




7.10. Electromagnetic drive of a forward leading axis (ADD system)

GENERAL INFORMATION

Knots of an electromagnetic drive of a forward leading axis

1. Control lamp
2. The processor block (on and/m with the selector of a forward axis)
3. The switch (on and/m with the selector of a forward axis)
4. Block of solenoids of an electromagnetic drive
5. Vacuum tank
  6. Drive switch
7. Drive
8. The selector switch (on and/m without the selector of a forward axis)
9. Relay
10. The switch of a forward axis (on and/m with the selector of a forward axis)

All-wheel drive Toyota 4 Runner/Hilux/Surf cars are equipped with an electromagnetic drive of a forward leading axis (ADD system).

At inclusion of a forward axis the drive blocks the left semi-axis through which the torque from the engine is transferred.

When using blocking of a semi-axis need for being blocked naves is excluded, loads of CV JOINTS, covers and details of differential which rotate even at the disconnected lobby of an axis however increase, and their wear amplifies.

On cars with such system of a semi-axis and covers demand especially attentive check.

At abnormal inclusion and switching off of a forward axis it is necessary to execute considered below check.

If the taken measures do not give result, it is necessary to hand over the car in car-care center.