| 1. Lift the car. |
| 2. Remove the driveshaft (forward or back). |
|
|
|
3. To Raskontrita (unbend a fillet) (a photo at the left) and unscrew a flange nut (a photo
on the right). |
|
4. Remove a flange, if necessary use a stripper. |
|
5. Accurately hook and get an epiploon. |
| 6. Grease edges of a new epiploon with technical vaseline. |
|
7. Press an epiploon an opravka. |
| 8. If necessary replace similarly a small epiploon of a flange. |
| 9. Further assembly is carried out upside-down. |