Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
- 6. Transmissions
   + 6.1. Mechanical transmission
   + 6.2. Automatic transmission
   - 6.3. Transfer case
      6.3.1. Specifications
      6.3.2. Epiploons of forward and back flanges
      6.3.3. Box lever
      - 6.3.4. Electromagnetic switch (selector) of a forward axis
         6.3.4.1. The switch on the handle of the lever of a transfer case
         6.3.4.2. Aktyuator
         6.3.4.3. Sensor of speed
         6.3.4.4. Control lamp
      6.3.5. Removal and installation of a transfer case
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes



6.3.4. Electromagnetic switch (selector) of a forward axis

GENERAL INFORMATION

Electromagnetic switch of the forward bridge

1. Aktyuator
2. Item switch of the forward bridge
3. Item switch of a demultiplikator
4. ECU block
5. Control lamp
6. The switch of a forward axis on the handle of the lever of a transfer case
7. The blocking switch
8. Sensor of speed of movement

The electromagnetic selector provides inclusion of a forward axis by means of the switch, mounted on the handle of the lever of a transfer case. The structure of the electromagnetic selector includes also processor control unit (ECU), an aktyuator, the item switch of the forward bridge, the demultiplikator L4 switch (a low gear of a transfer case), the blocking switch (on and/m with automatic transmission), the sensor of speed of movement and a control lamp of inclusion of both bridges, deduced on a guard of devices (see fig. Electromagnetic switch of the forward bridge).

It is possible to check and replace some knots and details of the selector independently. The ECU block is checked in car-care center.