Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation


Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. 4-cylinder engines
   + 3.2. Engines of V6 3,0 l (1993-1994) and 3,4 l (since 1995)
   - 3.3. Dismantle and major maintenance of the engine
      3.3.1. Specifications
      + 3.3.2. Major maintenance
      3.3.3. Engine diagnostics by means of the vacuum gage
      3.3.4. Compression check in engine cylinders
      + 3.3.5. Dismantle of the power unit
      - 3.3.6. Head of cylinders
         3.3.6.1. Dismantling of a head of cylinders
         3.3.6.2. Cleaning and check of a head of cylinders
         3.3.6.3. Assembly
      3.3.7. Valves
      3.3.8. Shatunno-porshnevaya group
      + 3.3.9. Crankshaft
      3.3.10. Block of cylinders
      3.3.11. Honningovaniye of cylinders
      + 3.3.12. Rods and pistons
      3.3.13. Radical and shatunny bearings
      3.3.14. Balansirnye shaft
      3.3.15. Assembly order
      3.3.16. Piston rings
      3.3.17. Engine start-up after repair and a running in
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes




3.3.6.3. Assembly
GENERAL INFORMATION

Before the beginning of assembly it is necessary to be convinced of purity of a head of the block irrespective of repair of this detail in car-care center was carried out or not.

PERFORMANCE ORDER
1. If the head of the block was under repair in car-care center, measure spring height in the established condition.
2. Establish all details of the klapanny mechanism upside-down.
3. At a napressovka of maslosjemny caps remember that caps of inlet and final valves differ.
4. Before assembly grease crackers for their temporary fixing.