Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. 4-cylinder engines
   - 3.2. Engines of V6 3,0 l (1993-1994) and 3,4 l (since 1995)
      3.2.1. Specifications
      3.2.2. Types of repair, выполняемыe without removal of the engine from the car
      3.2.3. Installation of the piston of the 1st cylinder in VMT of a step of compression
      3.2.4. Covers of heads of cylinders
      3.2.5. A soaking-up collector
      3.2.6. Final collectors
      3.2.7. Belt of an asterisk of cam-shafts
      3.2.8. Forward epiploon of the crankshaft
      3.2.9. Epiploons of cam-shafts
      3.2.10. Cam-shafts and pushers
      3.2.11. Heads of cylinders
      3.2.12. Oil pallet
      3.2.13. Oil pump
      3.2.14. Flywheel (a leading disk of the hydrotransformer)
      3.2.15. Back epiploon of the crankshaft
      3.2.16. Engine mount details
   + 3.3. Dismantle and major maintenance of the engine
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes
:



3.2. Engines of V6 3,0 l (1993-1994) and 3,4 l (since 1995)

GENERAL INFORMATION

V-shaped engines 6-cylinder verkhneklapanny, it is the share of 1 head on 3 cylinders.

Engines of 3,0 l 12-klapanny, were established on cars of 1993-1994. On these engines there are 2 cam-shafts (on 1 on each head). Each cam-shaft operates 6 valves (3 inlet and 3 final).

DOHC engines of 3,4 l – 24-klapanny, are established on cars since 1995. On these engines 4 cam-shafts (on 2 on each head) are provided.

In the real subsection types of repair of the specified engines without removal from the car are described.