Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
- 6. Transmissions
   + 6.1. Mechanical transmission
   - 6.2. Automatic transmission
      6.2.1. Specifications
      6.2.2. Transmission diagnostics
      6.2.3. Cable of a drive of a zaslonka
      6.2.4. Draft of transmission
      6.2.5. The blocking switch
      6.2.6. System of fixing of transfers
      6.2.7. Lever of change of transfers
      6.2.8. Removal and transmission installation
   + 6.3. Transfer case
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes
, r1



6.2.4. Draft of transmission

Adjustment

PERFORMANCE ORDER
1. Transfer the selector to all provisions, clamp operation thus should be felt. If operation is not felt, or the index does not coincide with designations, draft is necessary for adjusting.
2. Lift the car.
3. Release a nut of fastening of bent for to the selector (2) (1 – neutral situation).
4. Displace the lever (the lower part of the selector) clockwise against the stop, then displace back on 2 clicks. Establish the selector in situation N.
5. Tighten a nut with the set moment.
6. Adjust blocking switch (see subsection 6.2.5).
7. Check adjustment. The selector should be fixed in all provisions, and the engine should be started only in provisions P or N. If necessary repeat adjustment.