Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation


Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
- 6. Transmissions
   + 6.1. Mechanical transmission
   - 6.2. Automatic transmission
      6.2.1. Specifications
      6.2.2. Transmission diagnostics
      6.2.3. Cable of a drive of a zaslonka
      6.2.4. Draft of transmission
      6.2.5. The blocking switch
      6.2.6. System of fixing of transfers
      6.2.7. Lever of change of transfers
      6.2.8. Removal and transmission installation
   + 6.3. Transfer case
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes


Бути вагітною - бути красивою

6.2.5. The blocking switch
GENERAL INFORMATION

The switch blocks engine start in all positions of the selector except P and N. Otherwise check or switch replacement is required.

Check

PERFORMANCE ORDER
1. Lift the car.
2. Disconnect from the switch the socket.
3. At the switched-off ignition check resistance between switch conclusions (see tab. Resistance between switch conclusions). If necessary adjust the switch or replace.

Adjustment

PERFORMANCE ORDER
1. Transfer the selector to situation N.
2. Release a bolt of the switch (2) and adjust situation, for this purpose release a bolt, insert a flute (3) in the area of a neutral (1) and, holding the switch, tighten a bolt.
3. For switch replacement расконтрите a washer also unscrew a nut.
4. Unscrew a bolt and remove the switch.
5. Assembly is carried out upside-down. Adjust the switch.

Resistance between switch conclusions

Position of the selector
Normally closed conclusions
Normally closed conclusions
P
4–7
5–6
R
4–8
–
N
4–10
5–9
D
4–9
–
2
2–4
–
L
2–3
–