Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
- 6. Transmissions
   + 6.1. Mechanical transmission
   - 6.2. Automatic transmission
      6.2.1. Specifications
      6.2.2. Transmission diagnostics
      6.2.3. Cable of a drive of a zaslonka
      6.2.4. Draft of transmission
      6.2.5. The blocking switch
      6.2.6. System of fixing of transfers
      6.2.7. Lever of change of transfers
      6.2.8. Removal and transmission installation
   + 6.3. Transfer case
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes

6.2.7. Lever of change of transfers

Cнятие and installation

PERFORMANCE ORDER

1. Remove the top panel of back section and the control panel a back heater (see subsection 4.10).
	2. On all-wheel drive cars without the selector of a forward reducer (2) remove the handle of the lever of a transfer case. On cars with the selector of a forward reducer unscrew the screw and remove the handle of the lever of a transfer case. Remove the top panel of forward section. On cars with the selector of a forward reducer (1) disconnect the selector socket. Disconnect 2 latches, unscrew screws and remove a box of forward section.
3. Lift the car.
	4. Unscrew a nut and remove a washer, disconnect a rod from the lever.
	5. Disconnect the socket, unscrew bolts and remove the lever.
6. Assembly is carried out upside-down. A nut of a rod tighten with the set moment.