Toyota 4Раннер + 1. Maintenance instruction + 2. Maintenance + 3. Engines + 4. Systems of heating, ventilation + 5. Fuel and exhaust systems - 6. Transmissions + 6.1. Mechanical transmission - 6.2. Automatic transmission 6.2.1. Specifications 6.2.2. Transmission diagnostics 6.2.3. Cable of a drive of a zaslonka 6.2.4. Draft of transmission 6.2.5. The blocking switch 6.2.6. System of fixing of transfers 6.2.7. Lever of change of transfers 6.2.8. Removal and transmission installation + 6.3. Transfer case + 7. Transmission elements + 8. Brake system + 9. Suspension bracket and steering + 10. Body + 11. Electric equipment + 12. Electroschemes
|
Details of system of fixing of transfers
1. Solenoid of blocking of a key 2. Switch of a signal of braking 3, 8. Processor block of system of fixing |
4, 6. Fixing solenoid 5, 7. Trailer switch |
Check and replacement of details
PERFORMANCE ORDER |
1. Remove the bottom left facing panel and wheel facing (see subsection 10.23). |
2. Find details of system of fixing (see fig. Details of system of fixing of transfers). |
Solenoid of a clamp of transfer |
3. Disconnect from the solenoid the socket. |
|
4. Measure resistance between the specified conclusions. If resistance does not correspond to norm, or at a zapityvaniye of conclusions there is no click, the solenoid replace. |
Solenoid of blocking of a key |
5. Disconnect from the solenoid the socket. |
|
6. Measure resistance between the specified conclusions. If resistance does not correspond to norm, or at a zapityvaniye of conclusions there is no click, the solenoid replace. |
Trailer switch |
7. Disconnect from the switch the socket. |
|
8. Measure resistance between the specified conclusions. If the chain between the specified conclusions is absent, the switch replace. |
|
The table for check of the trailer switch
Position of the selector
|
Checked conclusions
|
Preset value
|
1Р
|
P1 – P
|
The closed chain
|
2Р
|
P1 – P
|
The closed chain
|
7–1
|
P2 – P
|
R, N, D, 2, L
|
P2 – P
|
The closed chain
|
|
|