Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
- 9. Suspension bracket and steering
   9.1. Specifications
   9.2. Springs and shock-absorbers (racks) of a forward suspension bracket
   9.3. Stabilizer of a forward suspension bracket
   9.4. Rotary fist
   9.5. Forward nave and bearing
   9.6. Spherical support
   9.7. Top lever
   9.8. Bottom lever
   9.9. Back shock-absorbers
   9.10. Back stabilizer of cross-section stability
   9.11. Cross-section bar of the back bridge
   9.12. Back springs
   9.13. Longitudinal bars of the back bridge
   9.14. Steering wheel
   9.15. Tip of steering drafts
   9.16. Cover of the steering mechanism
   9.17. Steering mechanism
   9.18. Pump of the hydraulic booster
   9.19. Power steering
   9.20. Corners of installation of forward wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes




9.10. Back stabilizer of cross-section stability

Removal and installation

PERFORMANCE ORDER
1. Lift a back part of the car.
2. Unscrew nuts (are specified by shooters) and remove drafts of the stabilizer.
3. Unscrew bolts (are specified by shooters) collars of plugs.
4. Remove the stabilizer.
5. Check a condition of pillows of drafts and plugs.
6. At detection of cracks and wear of a detail replace.
7. Installation is carried out upside-down.