| 1. Lift a front of the car and remove wheels. |
| 2. Remove the steering mechanism (see subsection 9.17). |
| 3. Disconnect from the bottom lever a suspension bracket rack. |
| 4. Remove draft of the stabilizer and a plug collar near the removed lever. |
|
5. Designate position of adjusting clowns. |
| 6. Unscrew nuts and bolts of axes. |
| 7. Remove the lever. |
| 8. Installation is carried out upside-down. |
| 9. At assembly establish clowns on the labels put at dismantling. |
| 10. Bolts and nuts of an axis of the lever finally tighten after car lowering. |