Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
- 9. Suspension bracket and steering
   9.1. Specifications
   9.2. Springs and shock-absorbers (racks) of a forward suspension bracket
   9.3. Stabilizer of a forward suspension bracket
   9.4. Rotary fist
   9.5. Forward nave and bearing
   9.6. Spherical support
   9.7. Top lever
   9.8. Bottom lever
   9.9. Back shock-absorbers
   9.10. Back stabilizer of cross-section stability
   9.11. Cross-section bar of the back bridge
   9.12. Back springs
   9.13. Longitudinal bars of the back bridge
   9.14. Steering wheel
   9.15. Tip of steering drafts
   9.16. Cover of the steering mechanism
   9.17. Steering mechanism
   9.18. Pump of the hydraulic booster
   9.19. Power steering
   9.20. Corners of installation of forward wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes



9.19. Power steering

GENERAL INFORMATION

To delete air from a hydraulic actuator of a wheel it is necessary at any dismantling of the highway, irrespective of those measures, which were accepted to prevent air hit.

Air removal

PERFORMANCE ORDER
1. Expose wheels in the provision of driving on a straight line.
2. Check liquid level, if necessary restore, having added to Cold label on щупе a tank.
3. Start the engine and transfer to an operating mode on fast single to a course.
4. Check liquid level.
5. Turn wheels in both parties against the stop, without allowing blow about the limiter.
6. Check and restore liquid level.
7. Return wheels to the provision of driving on a straight line.
8. Some minutes later stop the engine.
9. Check level of liquid which on the heated-up engine should be on Hot mark.
10. If necessary add.