Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Toyota 4Раннер
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Specifications
   2.2. Arrangement of knots and units
   + 2.3. Periodicity of maintenance and types of procedural works
   2.4. Intensive service
   + 2.5. Check of level of liquids
   2.6. Check of tires
   2.7. Check of level of liquid in automatic transmission
   2.8. Liquid level in system of a hydraulic actuator of a steering
   2.9. Oil replacement in the engine and the oil filter
   2.10. Care of the battery
   2.11. Check of system of cooling
   2.12. Check of a condition of the hoses located in a motor compartment
   2.13. Screen wiper brushes
   2.14. Shift of wheels
   2.15. Check of a suspension bracket of a steering
   2.16. Greasing of a running gear, suspension brackets, steering and body details
   2.17. Check of an exhaust system
   2.18. Check of level of oil in a manual transmission
   2.19. Check of level of oil in a transfer case
   2.20. Check of level of oil in a reducer
   2.21. Check of seat belts
   2.22. Check of covers of semi-axes
   2.23. Zolotnik of ventilation of a case
   2.24. A filtering element of the air filter
   2.25. Belts of a drive of hinged units
   2.26. Check of fuel system
   2.27. Check of wear of brakes
   2.28. Check and adjustment of pedals of coupling (brake)
   2.29. Replacement of candles
   2.30. Check and adjustment of gaps in valves
   2.31. Replacement of the fuel filter
   2.32. High-voltage wires, begunok and distributor cover
   2.33. Care of cooling system
   2.34. Naves and bearings of forward wheels
   2.35. Liquid replacement in automatic transmission and the filter
   + 2.36. Oil replacement
   2.37. Tank check with an absorber
   2.38. Check of the valve of system of a retsirkulyatsiya
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes




2.12. Check of a condition of the hoses located in a motor compartment

GENERAL INFORMATION

Hoses of the conditioner are checked and change only in car-care center service.

Under the influence of high temperatures in a motor compartment gradually there is a hardening and destruction of the rubber and plastic hoses which are ensuring functioning of various units of the engine. It is necessary to check periodically a condition of hoses, existence on them of cracks and hardening, weakening of connections, tightness violation. The procedure for test of hoses of system of cooling is described above.

Part of hoses fasten by means of collars. Check durability of an inhaling of collars as weakening of fastening leads to tightness violation. In those places in which collars are not provided, check reliability of consolidation of a hose on unions, elasticity loss in such connections owing to swelling or hardening of hoses is not allowed, tightness of connection otherwise is broken.

Vacuum hoses

PERFORMANCE ORDER
1. Vacuum hoses can be distinguished on color, or on the color strips pasted on them. For various systems of the engine vacuum hoses with various in the thickness of walls, resistance to compression by atmospheric pressure and thermal stability are used. At replacement track that new vacuum hoses in accuracy corresponded to the replaced.
2. Often the hose can be checked only after removal from the car. If some hoses act in film, previously put labels on interfaced the union and hoses subsequently not to break their relative positioning.
3. At check of a condition of vacuum hoses at the same time examine also plastic tees. Check existence on them of cracks, and also hose deformations in a prileganiye place to the union of a tee which can cause tightness violation.
4. For check of leaks listen through a hose piece with internal diameter about 6 mm, having put a hose to a checked place. Characteristic "hissing" will indicate leak existence.

Fuel hoses

PERFORMANCE ORDER
1. Check a condition of rubber fuel hoses, existence of damages on them.
2. At replacement of the fuel highway on injector engines the new highway should correspond in accuracy applied in fuel system of engines of this type.
3. At replacement of hoses always establish collars with screw fastening.

Metal tubes

PERFORMANCE ORDER
1. Metal tubes are usually used in fuel system. Check existence on tubes of the braided sites and small arising cracks.
2. At replacement it is necessary to establish only seamless steel tubes. Tubes from copper or aluminum do not approach, as do not maintain vibrating loadings.
3. Check a condition of metal tubes and unions of system of a hydraulic actuator of brakes in junctions with the main brake cylinder and the batcher. The basis for careful check is any signs of loss of liquid from a hydraulic actuator.