Repair and TOYOTA 4-RUNNER car operation - 2.32. High-voltage wires, begunok and distributor cover//Toyota of 4Раннер 1987-1998 / svetodesigner.ru

Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Toyota 4Раннер
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Specifications
   2.2. Arrangement of knots and units
   + 2.3. Periodicity of maintenance and types of procedural works
   2.4. Intensive service
   + 2.5. Check of level of liquids
   2.6. Check of tires
   2.7. Check of level of liquid in automatic transmission
   2.8. Liquid level in system of a hydraulic actuator of a steering
   2.9. Oil replacement in the engine and the oil filter
   2.10. Care of the battery
   2.11. Check of system of cooling
   2.12. Check of a condition of the hoses located in a motor compartment
   2.13. Screen wiper brushes
   2.14. Shift of wheels
   2.15. Check of a suspension bracket of a steering
   2.16. Greasing of a running gear, suspension brackets, steering and body details
   2.17. Check of an exhaust system
   2.18. Check of level of oil in a manual transmission
   2.19. Check of level of oil in a transfer case
   2.20. Check of level of oil in a reducer
   2.21. Check of seat belts
   2.22. Check of covers of semi-axes
   2.23. Zolotnik of ventilation of a case
   2.24. A filtering element of the air filter
   2.25. Belts of a drive of hinged units
   2.26. Check of fuel system
   2.27. Check of wear of brakes
   2.28. Check and adjustment of pedals of coupling (brake)
   2.29. Replacement of candles
   2.30. Check and adjustment of gaps in valves
   2.31. Replacement of the fuel filter
   2.32. High-voltage wires, begunok and distributor cover
   2.33. Care of cooling system
   2.34. Naves and bearings of forward wheels
   2.35. Liquid replacement in automatic transmission and the filter
   + 2.36. Oil replacement
   2.37. Tank check with an absorber
   2.38. Check of the valve of system of a retsirkulyatsiya
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes



2.32. High-voltage wires, begunok and distributor cover

GENERAL INFORMATION

Prevention

4-cylinder engines of release of 1998 and 6-cylinder engines of Toyota 4 Runner/Hilux/Surf cars are equipped RUBBISH – ignition system with direct installation of coils on candles. In this system the distributor is absent. Features of service are described in subsection 11.3.


Characteristic defects of a cover of the distributor

1. Cracks on a wire conclusion

2. Cover cracks

3. Breakdown

4. Wear of a piece of coal

5. Erosion of electrodes


Check places begunka

Check places a begunka are specified by shooters.


PERFORMANCE ORDER
1. On 4-cylinder engines (2,7 l) high-voltage wires of spark plugs should be checked at the same time with replacement of candles.
2. The simplest way of check consists in survey of wires on the working engine in the blacked-out garage. At detection of a luminescence (breakdown) of a wire replace. Check a condition of a cover and a distributor begunka.
3. For check and cleaning of wires disconnect each wire separately for what turn a tip on 1/2 turns and submit on itself. On cars of late releases it is required to remove a slip on a cover of a head of cylinders. Disconnect a wire on a distributor cover. Check a condition of contacts of wires and sealants. Wipe wires. A wire strongly do not bend, as the current-carrying vein can break. At detection of cracks, traces of breakdown and a podgoraniye of a wire replace.
4. Check corrosion existence on sockets of tips of wires and conclusions of candles. Check durability of demountable connection, having dressed on a candle a tip of a wire and having shaken it. At leaky connection draw in contact petals.
5. Rotating the jack handle clockwise, raise the car so that the wheel came off the earth. Completely unscrew bolts of fastening of a wheel and remove a wheel.
6. Unscrew screws of fastening and uncover the ignition distributor. Wipe a cover absolutely and check existence in and outside of a cover of cracks, traces of superficial breakdown (the thin charred paths), wear, a podgoraniye and weakening of contacts.