Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

Toyota 4Раннер
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Specifications
   2.2. Arrangement of knots and units
   + 2.3. Periodicity of maintenance and types of procedural works
   2.4. Intensive service
   + 2.5. Check of level of liquids
   2.6. Check of tires
   2.7. Check of level of liquid in automatic transmission
   2.8. Liquid level in system of a hydraulic actuator of a steering
   2.9. Oil replacement in the engine and the oil filter
   2.10. Care of the battery
   2.11. Check of system of cooling
   2.12. Check of a condition of the hoses located in a motor compartment
   2.13. Screen wiper brushes
   2.14. Shift of wheels
   2.15. Check of a suspension bracket of a steering
   2.16. Greasing of a running gear, suspension brackets, steering and body details
   2.17. Check of an exhaust system
   2.18. Check of level of oil in a manual transmission
   2.19. Check of level of oil in a transfer case
   2.20. Check of level of oil in a reducer
   2.21. Check of seat belts
   2.22. Check of covers of semi-axes
   2.23. Zolotnik of ventilation of a case
   2.24. A filtering element of the air filter
   2.25. Belts of a drive of hinged units
   2.26. Check of fuel system
   2.27. Check of wear of brakes
   2.28. Check and adjustment of pedals of coupling (brake)
   2.29. Replacement of candles
   2.30. Check and adjustment of gaps in valves
   2.31. Replacement of the fuel filter
   2.32. High-voltage wires, begunok and distributor cover
   2.33. Care of cooling system
   2.34. Naves and bearings of forward wheels
   2.35. Liquid replacement in automatic transmission and the filter
   + 2.36. Oil replacement
   2.37. Tank check with an absorber
   2.38. Check of the valve of system of a retsirkulyatsiya
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes

Mostbet ilə mobil tətbiq vasitəsilə dünyanın hər yerindən istədiyiniz zaman bahis edə bilərsiniz.

2.23. Zolotnik of ventilation of a case

Check and replacement

1. The zolotnik of ventilation of a case is located in a cover of a head of cylinders.
2. On the heated-up engine idling, get a zolotnik together with a hose from a cover of a head of cylinders or a soaking-up collector.
3. Muffle a finger a zolotnik or press a hose. If depression it is not felt, check purity of a hose, an opening in a collector, or a zolotnik. Replace the polluted or failed detail.
4. Stop the engine and shake a zolotnik. If knock is not listened, replace a zolotnik. For this purpose disconnect a hose and dress him on a new zolotnik. At acquisition of a zolotnik it is necessary to consider, that the new zolotnik in accuracy corresponded to make of the car and the engine (compare a new zolotnik with replaced).
5. Believe a condition of all hoses and a sealant. In case of anguishes and hardening replace.
6. Insert a zolotnik into place.