Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

Toyota 4Раннер
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Specifications
   2.2. Arrangement of knots and units
   + 2.3. Periodicity of maintenance and types of procedural works
   2.4. Intensive service
   + 2.5. Check of level of liquids
   2.6. Check of tires
   2.7. Check of level of liquid in automatic transmission
   2.8. Liquid level in system of a hydraulic actuator of a steering
   2.9. Oil replacement in the engine and the oil filter
   2.10. Care of the battery
   2.11. Check of system of cooling
   2.12. Check of a condition of the hoses located in a motor compartment
   2.13. Screen wiper brushes
   2.14. Shift of wheels
   2.15. Check of a suspension bracket of a steering
   2.16. Greasing of a running gear, suspension brackets, steering and body details
   2.17. Check of an exhaust system
   2.18. Check of level of oil in a manual transmission
   2.19. Check of level of oil in a transfer case
   2.20. Check of level of oil in a reducer
   2.21. Check of seat belts
   2.22. Check of covers of semi-axes
   2.23. Zolotnik of ventilation of a case
   2.24. A filtering element of the air filter
   2.25. Belts of a drive of hinged units
   2.26. Check of fuel system
   2.27. Check of wear of brakes
   2.28. Check and adjustment of pedals of coupling (brake)
   2.29. Replacement of candles
   2.30. Check and adjustment of gaps in valves
   2.31. Replacement of the fuel filter
   2.32. High-voltage wires, begunok and distributor cover
   2.33. Care of cooling system
   2.34. Naves and bearings of forward wheels
   2.35. Liquid replacement in automatic transmission and the filter
   + 2.36. Oil replacement
   2.37. Tank check with an absorber
   2.38. Check of the valve of system of a retsirkulyatsiya
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes

2.7. Check of level of liquid in automatic transmission


Shchup of automatic transmission

Shchup of automatic transmission (it is specified by an arrow) is in a back part of a motor compartment.

Marks for check of level of transmission liquid

1. Normal level (for cold liquid)
2. Normal level (for hot liquid)

Level should is between shooters.


1. Insufficient or superfluous level of liquid in automatic transmission leads to a unit exit out of operation.
2. Level should be checked after a trip in a usual mode on distance of 16 km (at warm weather) that liquid got warm to working temperature (not less than 60-70 ° C). After a long trip, or a trip with big loading wait for not less than 30 minutes.
3. Establish the car on an equal horizontal platform, turn on the hand brake, start the engine and press a brake pedal. The lever of the selector translate from situation P through all range and again put in situation P.
4. Get control щуп from a branch pipe (the engine continues to idle), wipe щуп.
5. Again insert щуп into a branch pipe.
6. Get щуп and check liquid level. Level should be in a range the designated Hot (hot). On cold transmission level should be in Cold range (cold). If it is necessary to add liquid, accurately pour in necessary amount of liquid of the corresponding brand through a branch pipe.
7. To add liquid through a funnel in the small portions (the amount of liquid between marks of Hot makes about 0,57 l.
8. If liquid of black color, or possesses a "burned" smell, it is necessary to replace liquid (see subsection 2.35).