Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

Toyota 4Раннер
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Specifications
   2.2. Arrangement of knots and units
   + 2.3. Periodicity of maintenance and types of procedural works
   2.4. Intensive service
   + 2.5. Check of level of liquids
   2.6. Check of tires
   2.7. Check of level of liquid in automatic transmission
   2.8. Liquid level in system of a hydraulic actuator of a steering
   2.9. Oil replacement in the engine and the oil filter
   2.10. Care of the battery
   2.11. Check of system of cooling
   2.12. Check of a condition of the hoses located in a motor compartment
   2.13. Screen wiper brushes
   2.14. Shift of wheels
   2.15. Check of a suspension bracket of a steering
   2.16. Greasing of a running gear, suspension brackets, steering and body details
   2.17. Check of an exhaust system
   2.18. Check of level of oil in a manual transmission
   2.19. Check of level of oil in a transfer case
   2.20. Check of level of oil in a reducer
   2.21. Check of seat belts
   2.22. Check of covers of semi-axes
   2.23. Zolotnik of ventilation of a case
   2.24. A filtering element of the air filter
   2.25. Belts of a drive of hinged units
   2.26. Check of fuel system
   2.27. Check of wear of brakes
   2.28. Check and adjustment of pedals of coupling (brake)
   2.29. Replacement of candles
   2.30. Check and adjustment of gaps in valves
   2.31. Replacement of the fuel filter
   2.32. High-voltage wires, begunok and distributor cover
   2.33. Care of cooling system
   2.34. Naves and bearings of forward wheels
   2.35. Liquid replacement in automatic transmission and the filter
   + 2.36. Oil replacement
   2.37. Tank check with an absorber
   2.38. Check of the valve of system of a retsirkulyatsiya
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes

2.35. Liquid replacement in automatic transmission and the filter

GENERAL INFORMATION

Works are carried out on the cooled-down engine after recently made trip.

PERFORMANCE ORDER

1. Lift the car and establish on supports.
	2. Substitute the pallet, unscrew a drain stopper and merge all liquid, without allowing losses. Put a stopper on a place and tighten.
	3. Carefully remove the pallet of a case of transmission and merge the liquid remains. For removal of the pallet unscrew bolts and in easy blows of a hammer displace, having opened consolidation.
	4. Unscrew bolts and remove the filter from the block of valves of transmission (bolts of the filter of transmission are specified by shooters).
5. Check a liquid condition. If liquid of dark color also exudes a burned smell, it indicates a transmission overheat. Presence at the pallet or at the filter of small particles of metal or a frictional material testifies to destruction of details internal transmission devices (multidisk coupling). In this case it is recommended to hand over the car in car-care center.
	6. Wash out the pallet solvent and dry, remove the remains of old consolidation. Establish the new filter, having replaced laying (it is specified by an arrow).
	7. Put on the demountable plane of the pallet the RTV hermetic roller, leading round openings from within.
8. Dress on a branch pipe of the index of level a hose and establish the pallet. Evenly and gradually tighten bolts till the set moment.
9. Lower the car and through a hose on a branch pipe fill in about 3,5 l of transmission liquid recommended brand it is specified in subsection 2.1.
10. Transfer the selector to the situation Park and start the engine.
11. Transfer the selector to all provisions, again transfer to the situation Park and check level, if necessary add liquid, having finished level to the normal.
12. At the first trips watch liquid level (on heated-up transmission) and check existence of podtekaniye from a case.