Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation


Toyota 4Раннер
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Specifications
   2.2. Arrangement of knots and units
   + 2.3. Periodicity of maintenance and types of procedural works
   2.4. Intensive service
   + 2.5. Check of level of liquids
   2.6. Check of tires
   2.7. Check of level of liquid in automatic transmission
   2.8. Liquid level in system of a hydraulic actuator of a steering
   2.9. Oil replacement in the engine and the oil filter
   2.10. Care of the battery
   2.11. Check of system of cooling
   2.12. Check of a condition of the hoses located in a motor compartment
   2.13. Screen wiper brushes
   2.14. Shift of wheels
   2.15. Check of a suspension bracket of a steering
   2.16. Greasing of a running gear, suspension brackets, steering and body details
   2.17. Check of an exhaust system
   2.18. Check of level of oil in a manual transmission
   2.19. Check of level of oil in a transfer case
   2.20. Check of level of oil in a reducer
   2.21. Check of seat belts
   2.22. Check of covers of semi-axes
   2.23. Zolotnik of ventilation of a case
   2.24. A filtering element of the air filter
   2.25. Belts of a drive of hinged units
   2.26. Check of fuel system
   2.27. Check of wear of brakes
   2.28. Check and adjustment of pedals of coupling (brake)
   2.29. Replacement of candles
   2.30. Check and adjustment of gaps in valves
   2.31. Replacement of the fuel filter
   2.32. High-voltage wires, begunok and distributor cover
   2.33. Care of cooling system
   2.34. Naves and bearings of forward wheels
   2.35. Liquid replacement in automatic transmission and the filter
   + 2.36. Oil replacement
   2.37. Tank check with an absorber
   2.38. Check of the valve of system of a retsirkulyatsiya
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes




2.19. Check of level of oil in a transfer case
PERFORMANCE ORDER
1. Unscrew the top stopper in a back part of a case of a transfer case.
2. Level of oil should be about bottom edge of an opening (A – a control / refueling opening, In – a drain opening in a case of a transfer case).
3. If oil level insufficient, add oil of the necessary brand through a control opening.
4. Tighten a stopper. Be convinced of lack of a leak throughout several km of run.