Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

Toyota 4Раннер
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Specifications
   2.2. Arrangement of knots and units
   + 2.3. Periodicity of maintenance and types of procedural works
   2.4. Intensive service
   + 2.5. Check of level of liquids
   2.6. Check of tires
   2.7. Check of level of liquid in automatic transmission
   2.8. Liquid level in system of a hydraulic actuator of a steering
   2.9. Oil replacement in the engine and the oil filter
   2.10. Care of the battery
   2.11. Check of system of cooling
   2.12. Check of a condition of the hoses located in a motor compartment
   2.13. Screen wiper brushes
   2.14. Shift of wheels
   2.15. Check of a suspension bracket of a steering
   2.16. Greasing of a running gear, suspension brackets, steering and body details
   2.17. Check of an exhaust system
   2.18. Check of level of oil in a manual transmission
   2.19. Check of level of oil in a transfer case
   2.20. Check of level of oil in a reducer
   2.21. Check of seat belts
   2.22. Check of covers of semi-axes
   2.23. Zolotnik of ventilation of a case
   2.24. A filtering element of the air filter
   2.25. Belts of a drive of hinged units
   2.26. Check of fuel system
   2.27. Check of wear of brakes
   2.28. Check and adjustment of pedals of coupling (brake)
   2.29. Replacement of candles
   2.30. Check and adjustment of gaps in valves
   2.31. Replacement of the fuel filter
   2.32. High-voltage wires, begunok and distributor cover
   2.33. Care of cooling system
   2.34. Naves and bearings of forward wheels
   2.35. Liquid replacement in automatic transmission and the filter
   + 2.36. Oil replacement
   2.37. Tank check with an absorber
   2.38. Check of the valve of system of a retsirkulyatsiya
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes

2.9. Oil replacement in the engine and the oil filter

1. For ensuring access to the lower part of the car, it is necessary to establish it on two supports, either to lift a telfer, or to call in on a hole or a platform.
2. The car should be in horizontal situation, the engine should be heated-up.
3. Unscrew a stopper of a maslozalivny mouth.
4. Substitute the pallet, clear and unscrew a drain stopper. Merge oil.
5. Clear and tighten a drain stopper.
6. Substitute a vessel under the oil filter, lower the car.
7. By means of a special key release the oil filter then turn out it hands. Immediately incline the filter and merge oil in a vessel.
8. Carefully wipe pure rags a place of a prileganiye of the filter on the engine.
9. Slightly oil for the engine a sealing ring of the new filter and wrap the filter into place. Tighten the filter by hand.
10. At first fill in a half of volume of oil then wait some minutes that all oil flew down in the pallet. Continue to add oil in the small portions, before achievement of a mark of "N" on щупе.
11. Start the engine and on the working engine check tightness of a stopper of the pallet and the filter, having tracked these places within several minutes.
12. Stop the engine and wait some minutes that oil flew down in the pallet. Again check oil level. After filling of all channels and the filter level of oil can go down. If necessary add oil to a mark of "N".