Repair and TOYOTA 4-RUNNER car operation - 11.26. Lock of ignition and lock drum//Toyota of 4Раннер 1987-1998 / svetodesigner.ru

Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
- 11. Electric equipment
   11.1. Specifications
   11.2. Battery
   + 11.3. Ignition system
   11.4. Coil (and) ignitions
   11.5. Ignition distributor
   11.6. Check and installation of the moment of ignition
   11.7. Block of electronic ignition
   11.8. Induction sensor
   + 11.9. System of a charge of the battery
   + 11.10. Generator
   11.11. System of start-up of the engine
   + 11.12. Starter electric motor
   11.13. Traction relay
   11.14. Tension check
   11.15. Detection of short circuit
   11.16. Check of reliability of grounding
   11.17. Check of integrity of a chain
   11.18. Finding of not closed chain
   11.19. Search of malfunctions
   11.20. Safety locks
   11.21. Fusible crossing points
   11.22. Breakers
   11.23. Relay
   11.24. Breaker of indexes of turn / alarm system
   11.25. Switch of indexes of turn
   11.26. Lock of ignition and lock drum
   11.27. Switch of external lighting
   11.28. Screen wiper switch
   11.29. Lamps of headlights
   11.30. Adjustment of headlights
   11.31. Headlight case
   11.32. Replacement of lamps
   11.33. Receiver and loudspeakers
   11.34. Aerial
   + 11.35. Screen wiper electric motor
   11.36. Switch of heating of back glass
   11.37. Heater of back glass
   11.38. Guard of devices
   11.39. Sound signal
   11.40. Electric drive of mirrors
   11.41. Cruise control
   + 11.42. Window regulator electric drive
   11.43. Electric drive of door locks
   11.44. Safety cushions
+ 12. Electroschemes



11.26. Lock of ignition and lock drum

Check

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Disconnect a safety cushion (see subsection 11.44).
3. Remove a wheel.
4. Remove a casing of a steering column.
5. Hook and get an overlay of the lock of ignition.
6. Disconnect from the lock sockets.
7. Check chain existence between lock conclusions.
8. In position of the LOCK lock between conclusions of a chain should not be.
9. In position of the ASS lock the chain should be between conclusions 2 and 3.
10. In position of the ON lock the chain should be between conclusions 2, 3 and 4 and conclusions 6 and 7.
11. In position of the START lock the chain should be between conclusions 1, 2 and 4 and conclusions 6, 7 and 8.
12. Check absence of short circuit of contacts of the switch of the alarm system of the key left in the lock. For what transfer the switch to the situation Off and get a key.
13. Insert a key and transfer the switch to the situation On, between contacts 1 and 2 should be a chain.
14. If results of check negative, the switch replace.

Replacement

PERFORMANCE ORDER
1. Execute stages 1-6.
2. Insert a key into the lock and transfer to situation ASS.
3. Having inserted a thin screw-driver into the bottom opening of the cast case of the lock, wring out a latch, at the same time submitting the lock on itself.
4. Installation is carried out upside-down.