Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
- 11. Electric equipment
   11.1. Specifications
   11.2. Battery
   + 11.3. Ignition system
   11.4. Coil (and) ignitions
   11.5. Ignition distributor
   11.6. Check and installation of the moment of ignition
   11.7. Block of electronic ignition
   11.8. Induction sensor
   + 11.9. System of a charge of the battery
   + 11.10. Generator
   11.11. System of start-up of the engine
   + 11.12. Starter electric motor
   11.13. Traction relay
   11.14. Tension check
   11.15. Detection of short circuit
   11.16. Check of reliability of grounding
   11.17. Check of integrity of a chain
   11.18. Finding of not closed chain
   11.19. Search of malfunctions
   11.20. Safety locks
   11.21. Fusible crossing points
   11.22. Breakers
   11.23. Relay
   11.24. Breaker of indexes of turn / alarm system
   11.25. Switch of indexes of turn
   11.26. Lock of ignition and lock drum
   11.27. Switch of external lighting
   11.28. Screen wiper switch
   11.29. Lamps of headlights
   11.30. Adjustment of headlights
   11.31. Headlight case
   11.32. Replacement of lamps
   11.33. Receiver and loudspeakers
   11.34. Aerial
   + 11.35. Screen wiper electric motor
   11.36. Switch of heating of back glass
   11.37. Heater of back glass
   11.38. Guard of devices
   11.39. Sound signal
   11.40. Electric drive of mirrors
   11.41. Cruise control
   + 11.42. Window regulator electric drive
   11.43. Electric drive of door locks
   11.44. Safety cushions
+ 12. Electroschemes

11.27. Switch of external lighting

GENERAL INFORMATION

Numbering of conclusions of the switch of external lighting and position of the switch

Check

PERFORMANCE ORDER

1. Disconnect the battery from weight.

2. Disconnect a safety cushion (see subsection 11.44).

3. Remove a wheel.

4. Remove a casing of a steering column.

5. Disconnect from the switch of indexes of turn / light of headlights the socket.

6. Check chain existence between switch conclusions.

7. In position of the OFF switch between conclusions of a chain should not be.

8. In position of the LOCK lock between conclusions of a chain should not be.

9. In position of the TAIL switch (back lamps) the chain should be between conclusions 14 and 16.

10. In position of the HEAD switch (headlight) the chain should be between conclusions 13, 14 and 16.

11. At inclusion of a passing beam of headlights (situation Low beam) the chain should be between conclusions 16 and 17.

12. At inclusion of a driving beam of headlights (situation High beam) the chain should be between conclusions 7 and 16.

13. In position of the FLASH switch (a blinking mode headlights) the chain should be between conclusions 7, 8 and 16.

Replacement

PERFORMANCE ORDER

1. Get the switch from the case.
2. Installation is carried out upside-down. Before installation of a wheel check a centering of the coil of a wire of a safety cushion (see subsection 9.14).