Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
- 11. Electric equipment
   11.1. Specifications
   11.2. Battery
   + 11.3. Ignition system
   11.4. Coil (and) ignitions
   11.5. Ignition distributor
   11.6. Check and installation of the moment of ignition
   11.7. Block of electronic ignition
   11.8. Induction sensor
   + 11.9. System of a charge of the battery
   + 11.10. Generator
   11.11. System of start-up of the engine
   + 11.12. Starter electric motor
   11.13. Traction relay
   11.14. Tension check
   11.15. Detection of short circuit
   11.16. Check of reliability of grounding
   11.17. Check of integrity of a chain
   11.18. Finding of not closed chain
   11.19. Search of malfunctions
   11.20. Safety locks
   11.21. Fusible crossing points
   11.22. Breakers
   11.23. Relay
   11.24. Breaker of indexes of turn / alarm system
   11.25. Switch of indexes of turn
   11.26. Lock of ignition and lock drum
   11.27. Switch of external lighting
   11.28. Screen wiper switch
   11.29. Lamps of headlights
   11.30. Adjustment of headlights
   11.31. Headlight case
   11.32. Replacement of lamps
   11.33. Receiver and loudspeakers
   11.34. Aerial
   + 11.35. Screen wiper electric motor
   11.36. Switch of heating of back glass
   11.37. Heater of back glass
   11.38. Guard of devices
   11.39. Sound signal
   11.40. Electric drive of mirrors
   11.41. Cruise control
   + 11.42. Window regulator electric drive
   11.43. Electric drive of door locks
   11.44. Safety cushions
+ 12. Electroschemes

11.28. Screen wiper switch

GENERAL INFORMATION

Numbering of conclusions of switches with the increased frequency of work and with a mode of alternation of cleaning and glass washing

1. The switch with the increased frequency of work

2. The switch with a mode of alternation of cleaning and glass washing

Numbering of conclusions of the switch of a cleaner of back glass with the increased frequency of work and with a mode of alternation of cleaning and glass washing

1. The switch of a cleaner of back glass with the increased frequency of work

2. The switch of a cleaner of back glass with a mode of alternation of cleaning and glass washing

Check

PERFORMANCE ORDER

1. Disconnect the battery from weight.
2. Disconnect a safety cushion.
3. Remove a wheel.
4. Remove a casing of a steering column.
	5. Disconnect the socket from the screen wiper switch.
6. Check chain existence between switch conclusions (see fig. Numbering of conclusions of switches with the increased frequency of work and with a mode of alternation of cleaning and washing of glass and fig. Numbering of conclusions of the switch of a cleaner of back glass with the increased frequency of work and with a mode of alternation of cleaning and glass washing).
The switch with the increased frequency of work (in the conditions of a fog)
7. In position of the OFF switch the chain should be between conclusions 7 and 16.
8. In position of the MIST switch (fog) the chain should be between conclusions 7 and 17.
9. In position of the LO switch (a weak course) the chain should be between conclusions 7 and 17.
10. In position of the HI switch (a fast course) the chain should be between conclusions 8 and 17.
The switch with alternation of cleaning and glass washing
11. In position of the OFF switch the chain should be between conclusions 7 and 16.
12. In position of the MIST switch (fog) the chain should be between conclusions 7 and 16.
13. In position of the LO switch (a weak course) the chain should be between conclusions 7 and 17.
14. In position of the HI switch (a fast course) the chain should be between conclusions 8 and 17.
Switch of a cleaner of back glass
15. In position of the WASHER switch 1 chain should be between conclusions 2 and 12.
16. In position of the OFF switch between all conclusions of a chain should not be.
17. In position of the WIPER INT switch the chain should be between conclusions 2 and 13.
18. In position of the WIPER ON switch the chain should be between conclusions 2 and 10.
19. In position of the WASHER 2 switch the chain should be between conclusions 2, 10 and 12.
20. For check of switches of both types be convinced available chains between conclusions 2 and 11 of position of the ON switch.
21. If results of check negative, the switch replace.

Replacement

PERFORMANCE ORDER

	1. Get the switch from the case. For this purpose unscrew two screws (are specified by shooters). The switch is removed from a steering column.
2. Installation is carried out upside-down. Before installation of a wheel check a centering of the coil of a wire of a safety cushion (see subsection 9.14).