Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
- 8. Brake system
   8.1. Specifications
   8.2. ABS system
   8.3. Blocks of disk brakes
   8.4. Brake support
   8.5. Brake disk
   8.6. Blocks of drum-type brakes
   8.7. Wheel cylinder of back brakes
   8.8. Main cylinder of brakes
   8.9. Hoses and hydraulic actuator tubes
   8.10. Pressure regulator
   8.11. Hand brake
   8.12. Cables of the hand brake
   8.13. Vacuum amplifier of brakes
   8.14. Pumping of brakes
   8.15. Adjustment of a pedal of a brake
   8.16. Switch of a signal of braking
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes



8.1. Specifications

GENERAL INFORMATION

Gap of the switch of a signal of braking
0,4-2,4
Free wheeling of a pedal of a brake
3–6
Height of the released pedal
156-171
Height of the pressed pedal
not less than 72
Initial height of a spring of a regulator of pressure (the dosing-out and perepuskny valve)
220
Adjusting gap From the lever of the hand brake
0,4-0,78
Gap between a pusher of the amplifier of brakes and the piston of the main cylinder
0
Distance And a regulator of pressure of brakes (is defined by length of a spring of sounding of loading)
223
Disk brakes
Limiting thickness of slips
Disk palpation
no more than 0,08 mm
Limiting thickness of a disk
it is cast on a disk
Drum-type brakes
Limiting thickness of slips
Limiting diameter of a drum
it is cast on a disk

Inhaling moments (N of m)

Bolt of the ring union of a hose of a brake
27
Hairpins, fingers and support bolts
110
Bolts of a torsionny plate of a support (on rear-wheel and/m)
98
Bolts of the dosing-out valve of a regulator of pressure
10,8
Nuts of the main cylinder
10,8
Nuts of the amplifier of brakes
12
Bolts of the wheel cylinder
8,4