Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
- 8. Brake system
   8.1. Specifications
   8.2. ABS system
   8.3. Blocks of disk brakes
   8.4. Brake support
   8.5. Brake disk
   8.6. Blocks of drum-type brakes
   8.7. Wheel cylinder of back brakes
   8.8. Main cylinder of brakes
   8.9. Hoses and hydraulic actuator tubes
   8.10. Pressure regulator
   8.11. Hand brake
   8.12. Cables of the hand brake
   8.13. Vacuum amplifier of brakes
   8.14. Pumping of brakes
   8.15. Adjustment of a pedal of a brake
   8.16. Switch of a signal of braking
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes



8.7. Wheel cylinder of back brakes

GENERAL INFORMATION

Prevention

Cylinders change only in pair on an axis, to change them separately it is forbidden.


Removal and installation

PERFORMANCE ORDER
1. Remove drums and blocks.
2. Unscrew the union of a tube of a hydraulic actuator, muffle a tube and an opening in the cylinder (And – the union of a tube of a brake, In – bolts of the wheel cylinder).
3. Unscrew bolts and remove the cylinder.
4. Installation is carried out upside-down. Pump over a hydraulic actuator of brakes and remove air.