Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

Toyota 4Раннер
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
- 7. Transmission elements
   7.1. Specifications
   - 7.2. Coupling
      7.2.1. Main cylinder of coupling
      7.2.2. Working cylinder of coupling
      7.2.3. Coupling details
      7.2.4. Vyzhimna bearing
      7.2.5. The directing bearing
      7.2.6. Coupling hydraulic actuator
      7.2.7. Coupling pedal
      7.2.8. The blocking switch of coupling
   + 7.3. Kardanny (е) shaft (ы) and kardanny hinges
   7.4. Back and forward axes
   7.5. Bearing, epiploon and semi-axis of the back bridge
   7.6. Epiploon of a reducer of the back bridge and forward axis
   7.7. Zadny Bridge
   7.8. Forward semi-axes
   7.9. Replacement of covers and CV JOINT dismantling
   + 7.10. Electromagnetic drive of a forward leading axis (ADD system)
   7.11. Forward reducer
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes

7.2.7. Coupling pedal

GENERAL INFORMATION

Height and free wheeling of a pedal of coupling

1. Definition place люфта pusher (free wheeling)

2. Place of adjustment of height of a pedal

3. Pedal height

4. Free wheeling

Check and adjustment

PERFORMANCE ORDER

1. Remove a rug to provide access to an antinoise covering.

2. Check pedal distance from a floor.

3. For adjustment remove the bottom facing, release a lock-nut and rotating a bolt, adjust pedal height. Tighten a lock-nut.

4. Check a free wheeling, i.e. distance from the provision of completely released pedal to a place in which resistance to its course starts to be felt.

5. For adjustment release a lock-nut of a pusher and rotating a pusher, adjust a pedal course. Tighten a lock-nut.

6. Again check height and a free wheeling of a pedal. If necessary adjust.

7. Check adjustment of the blocking switch of coupling.